Description
WING is an architectural, linear diffuser, used to introduce or evacuate air.
The diffuser is both an elegant and practical ventilation solution.
WING integrates fully into the ceiling and is recommended for residential spaces, conference rooms, offices, classrooms, etc.
The diffuser is made with 1 to 4 slots with a width of 19 mm and is equipped with adjustable blades.
The diffuser blades allow to adjust the airflow.
Long-length diffusers have segmented blades at a maximum size of 1500 mm
For a uniform appearance of the enclosures, the WING diffuser can also be used for air evacuation.
Dimensional limits of diffuser length: minimum 0.3m and maximum 3m.
In the case of diffusers with a length > 3m, the execution is modular, and the product is delivered together with the necessary connecting parts.
Technical drawing
Perimeter configurations can be made by using corner sections (angle 90ᵒ).
Product specifications
1 - Fixing screw
2 – WING diffuser
3 - Bracket (“U” type system)
4 – Plenum box (optional)
The legend
Ak [m²] - The free surface
X [m] - The length of the air jet at a speed of 0.375m/s
NR [dB (A)] - Noise level without room attenuation
∆Pt [Pa] - Pressure loss
The diffuser can be supplied with a plenum connecting to a circular duct with horizontal connection.
The plenum is provided with suspension elements (lugs) and bead roll on the spigot, for easy fixing of the flexible duct.
The plenum is delivered insulated or uninsulated.
Optionally, a perforated damper can be mounted on the plenum connection to balance the air flow.
Adapter (plenum box)
The adapter is made of Z140 galvanized steel sheet and is equipped with suspension lugs.
On request, the plenum can be insulated with 6 mm thick elastomeric rubber.
Perforated damper
The perforated damper is mounted on the adapter spigot and has the role of balancing the air flow.
The diffuser is mounted in a false continuous ceiling. The fixing of the plenum diffuser is done by means of “U” type mounting systems (bracket), positioned inside the plenum and the screws.
After fixing, apply gypsum plaster (adhesive) over the diffuser frame and then apply wall paint.
False continuous ceiling mounting
